#1 Le 03/05/2021, à 14:19
- Caille

Comment retrouver mon fstab d'origine [Résolu]
Bonjour,
Je viens de faire une petite connerie sur mon Ubuntu nouvellement installé, mais je n'arrive à rien tout seul.
J'ai simplement modifier dans disque le montage de mes partitions, la partition /racine et le /home (séparé).
Malheureusement je n'ai pas sauvegardé avant le fichier fstab
Du coup je n'arrive plus a redémarrer, mon fstab actuel est le suivant, depuis un live USB !
- Pour la partition racine que j'ai nommée ubuntu_systeme /dev/sda6
- Pour la partition /home que j'ai nommée ubuntu_home /dev/sda11
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
# /home was on /dev/sda11 during installation
/swapfile none swap sw 0 0
/dev/disk/by-uuid/3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ /mnt/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ auto nosuid,nodev,nofail,x-gvfs-show 0 0Je viens de faire un boot-info !
boot-repair-4ppa130 [20210503_1306]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
=> No known boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/Boot/fbia32.efi
/efi/Boot/fbx64.efi /efi/Boot/mmx64.efi
/efi/debian/fbx64.efi /efi/debian/grubx64.efi
/efi/debian/mmx64.efi /efi/debian/shimx64.efi
/efi/fedora/gcdia32.efi /efi/fedora/gcdx64.efi
/efi/fedora/grubia32.efi /efi/fedora/grubx64.efi
/efi/fedora/mmia32.efi /efi/fedora/mmx64.efi
/efi/fedora/shim.efi /efi/fedora/shimia32.efi
/efi/fedora/shimia32-fedora.efi
/efi/fedora/shimx64.efi /efi/fedora/shimx64-fedora.efi
/efi/Manjaro/grubx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/debian/grub.cfg /efi/fedora/grub.cfg
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Manjaro Linux
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 11 (bullseye)
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 10 (buster)
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Manjaro Linux
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda11: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/BOOT/grubx64.efi /efi/BOOT/mmx64.efi
================================ 6 OS detected =================================
OS#1: Manjaro Linux (21.0.1) on sda5
OS#2: Ubuntu 20.04.2 LTS on sda6
OS#3: Debian GNU/Linux 11 (bullseye) on sda7
OS#4: Debian GNU/Linux 10 (buster) on sda8
OS#5: Manjaro Linux (21.0.3) on sda9
OS#6: Windows 8 or 10 on sda4
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04.2 LTS, focal, x86_64)
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0007
Timeout: 0 seconds
BootOrder: 0001,0002,0003,0000,0006,0007
Boot0000* Windows Boot Manager HD(2,GPT,a695adab-994b-448c-9a62-c1d4a17b9173,0x109000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0001* Manjaro HD(2,GPT,a695adab-994b-448c-9a62-c1d4a17b9173,0x109000,0x32000)/File(\EFI\Manjaro\grubx64.efi)
Boot0002* ubuntu HD(2,GPT,a695adab-994b-448c-9a62-c1d4a17b9173,0x109000,0x32000)/File(\EFI\ubuntu\shimx64.efi)
Boot0003* debian HD(2,GPT,a695adab-994b-448c-9a62-c1d4a17b9173,0x109000,0x32000)/File(\EFI\debian\shimx64.efi)
Boot0006* ubuntu HD(2,GPT,a695adab-994b-448c-9a62-c1d4a17b9173,0x109000,0x32000)/File(EFI\Ubuntu\grubx64.efi)
Boot0007* UEFI: Generic Flash Disk 8.07 PciRoot(0x0)/Pci(0x14,0x0)/USB(3,0)/HD(1,GPT,e738876a-ca84-4028-940d-9200767eeb83,0x800,0xf59fdf)AMBO
This session has been detected as 'live' because df -Th / contains overlay
78415fb8fb9b909f8029858113f1335f sda2/Boot/bootx64.efi
200ab215c2cb8722296342a9e627d38c sda2/Boot/fbia32.efi
2895d47544fd587b26c7e29be1295c27 sda2/Boot/fbx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sda2/Boot/mmx64.efi
f70988e5806bb2815d5dac0fa2859685 sda2/debian/fbx64.efi
70d0a493b4a0e39cdf310c1f9f8c5b95 sda2/debian/grubx64.efi
40ab43e56b2c6f9b774895beb8a398c7 sda2/debian/mmx64.efi
8273287f52ffff4624121d2926ef9df4 sda2/debian/shimx64.efi
23fafd2e9d5838717550f865e2657145 sda2/fedora/gcdia32.efi
a4fabacbc8260a7c1d492f3f17d934fc sda2/fedora/gcdx64.efi
a552fa89c4ea07b47f0eca0d705bac3b sda2/fedora/grubia32.efi
9885427c37f3874b8aa04e7f9aed4786 sda2/fedora/grubx64.efi
41c4276e977e53b050992112472ab40f sda2/fedora/mmia32.efi
81c81deecc9294607cf865657fbbb69c sda2/fedora/mmx64.efi
f2c580ccd60898d4aa2676249d67c171 sda2/fedora/shim.efi
87e606dee08705c7ac75737a83a6e063 sda2/fedora/shimia32.efi
5bb208de54be71a8741ea6f651a008f6 sda2/fedora/shimia32-fedora.efi
f2c580ccd60898d4aa2676249d67c171 sda2/fedora/shimx64.efi
6841eb6a2033a4d29e4ab654ea1e23f3 sda2/fedora/shimx64-fedora.efi
b6dc0518f5b7c1b8acd6000896ffecd1 sda2/Manjaro/grubx64.efi
e169c84b62cae5d67d21f3412edf807f sda2/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 sda2/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f sda2/ubuntu/shimx64.efi
8ee9a2af3728e3c77195e46920b6b329 sda2/Microsoft/Boot/bootmgfw.efi
363d36eb425879b79b45c22ec282f42f sda2/Microsoft/Boot/bootmgr.efi
87e606dee08705c7ac75737a83a6e063 sda2/Boot/BOOTIA32.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 34 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda10 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda11 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda5 : is-os, 64, pacman, no-docgrub, grub2, grub-install, grubenv-ng, update-grub, farbios
sda6 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda7 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda8 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
sda9 : is-os, 64, pacman, no-docgrub, grub2, grub-install, grubenv-ng, update-grub, farbios
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda10 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda11 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda5 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda6 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda7 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda8 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda9 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda10 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda11 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda4 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda6 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda7 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda8 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda9 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdb2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
fdisk -l (filtered): ___________________________________________________________
Disk sda: 953.89 GiB, 1024209543168 bytes, 2000409264 sectors
Disk identifier: 30C45098-9564-4BB9-A5F5-9970C49D230A
Start End Sectors Size Type
sda1 2048 1085439 1083392 529M Windows recovery environment
sda2 1085440 1290239 204800 100M EFI System
sda3 1290240 1323007 32768 16M Microsoft reserved
sda4 1323008 410923007 409600000 195.3G Microsoft basic data
sda5 1221120000 1384959999 163840000 78.1G Linux filesystem
sda6 1384960000 1487874047 102914048 49.1G Linux filesystem
sda7 1025808384 1221119999 195311616 93.1G Linux filesystem
sda8 830496768 1025808383 195311616 93.1G Linux filesystem
sda9 1714812928 1817212927 102400000 48.8G Linux filesystem
sda10 1817212928 2000409230 183196303 87.4G Linux filesystem
sda11 1487874048 1714812927 226938880 108.2G Linux filesystem
Partition table entries are not in disk order.
Disk sdb: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 3E07897E-1777-4E1A-9427-57CF40C8F565
Start End Sectors Size Type
sdb1 34 32767 32734 16M Microsoft reserved
sdb2 32768 3798503423 3798470656 1.8T Microsoft basic data
sdb3 3798503424 3907028991 108525568 51.8G Linux filesystem
Disk sdc: 7.69 GiB, 8242855936 bytes, 16099328 sectors
Disk identifier: 568AB238-7B74-4880-AEB5-CFCE921E2DDB
Start End Sectors Size Type
sdc1 2048 16099294 16097247 7.7G Microsoft basic data
parted -lm (filtered): _________________________________________________________
sda:1024GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:1049kB:556MB:555MB:ntfs:Basic data partition:hidden, diag;
2:556MB:661MB:105MB:fat32:EFI System Partition:boot, esp;
3:661MB:677MB:16.8MB::Microsoft reserved partition:msftres;
4:677MB:210GB:210GB:ntfs:Basic data partition:msftdata;
8:425GB:525GB:100GB:ext4:Debian_Buster:;
7:525GB:625GB:100GB:ext4:Debian_SID:;
5:625GB:709GB:83.9GB:ext4:Manjaro_KDE:;
6:709GB:762GB:52.7GB:ext4::;
11:762GB:878GB:116GB:ext4::;
9:878GB:930GB:52.4GB:ext4::;
10:930GB:1024GB:93.8GB:ext4::;
sdb:2000GB:scsi:512:4096:gpt:ATA ST2000LX001-1RG1:;
1:17.4kB:16.8MB:16.8MB::Microsoft reserved partition:msftres;
2:16.8MB:1945GB:1945GB:ntfs:Basic data partition:msftdata;
3:1945GB:2000GB:55.6GB:ext4::;
sdc:8243MB:scsi:512:512:gpt:Generic Flash Disk:;
1:1049kB:8243MB:8242MB:fat32:Main Data Partition:msftdata;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ntfs 2A1A45ED1A45B71B 87878457-4bde-486f-8d0c-b7bd7f11dde6 Récupération Basic data partition
├─sda2 vfat 5C46-7558 a695adab-994b-448c-9a62-c1d4a17b9173 EFI System Partition
├─sda3 9709d1d8-e2d1-44ec-b341-c7a46bf5fe10 Microsoft reserved partition
├─sda4 ntfs 1E2A742A2A73FCD9 3ef85129-1b76-4769-a16b-2c62d6f1072c Windows_10 Basic data partition
├─sda5 ext4 acbf1fd6-d87d-4603-9b5d-fed2491b55f8 64dbf5c3-c0a9-c84d-8bb5-0ed90e63164e manjaro_kde Manjaro_KDE
├─sda6 ext4 39d77b20-31f5-4014-8d1a-519d8b70eaff 74033568-724b-4824-b258-cac0c9de0bad ubuntu_systeme
├─sda7 ext4 3d3fd50b-0899-435a-906c-383385a266a9 ca5f9b0c-7cbd-4bf3-b557-244f0ef70a78 debian_sid Debian_SID
├─sda8 ext4 7b307716-be2d-48ef-af16-2d149f54b14d 6930a6dd-7e37-4159-bf7c-1b2b9d143f98 debian_buster Debian_Buster
├─sda9 ext4 b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d 8e064489-d6dd-b74e-8edc-f237b53f6eee manjaro_systeme
├─sda10 ext4 f060896a-3410-43ac-b5a2-aa73c9b26fc2 cd849dc1-1b31-f549-b431-0e0920ddc390 manjaro_home
└─sda11 ext4 1b1f9f3d-b55c-416b-ab54-9fc73724eea5 67968f1e-0c2c-4797-b0bc-198fda536f5c ubuntu_home
sdb
├─sdb1 62963780-5d95-465e-a58c-28a811f1d25a Microsoft reserved partition
├─sdb2 ntfs 3E64D2DA64D2944D 9fa8584b-cabe-4ac2-ba5f-3734f598565b HDD Basic data partition
└─sdb3 ext4 7158c1a9-90c8-4a41-a645-a72ad84a1275 f403aaef-2636-274c-a0a2-929783e2ff2d AUR
sdc
└─sdc1 vfat B2A6-1950 e738876a-ca84-4028-940d-9200767eeb83 UBUNTU 20_0 Main Data Partition
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda10 76.4G 5% /mnt/boot-sav/sda10
sda11 96.6G 4% /mnt/boot-sav/sda11
sda1 89.8M 83% /mnt/boot-sav/sda1
sda2 36.7M 62% /mnt/boot-sav/sda2
sda4 109G 44% /mnt/boot-sav/sda4
sda5 28.4G 58% /mnt/boot-sav/sda5
sda6 34.2G 24% /mnt/boot-sav/sda6
sda7 74.1G 14% /mnt/boot-sav/sda7
sda8 72.7G 15% /mnt/boot-sav/sda8
sda9 28.7G 35% /mnt/boot-sav/sda9
sdb2 715.2G 61% /media/ubuntu/HDD
sdb3 48G 0% /mnt/boot-sav/sdb3
sdc1 5G 35% /cdrom
Mount options: __________________________________________________________________
sda10 rw,relatime
sda11 rw,relatime
sda1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda4 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda5 rw,relatime
sda6 rw,relatime
sda7 rw,relatime
sda8 rw,relatime
sda9 rw,relatime
sdb2 rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sdb3 rw,relatime
sdc1 ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
===================== sda2/efi/debian/grub.cfg (filtered) ======================
search.fs_uuid 3d3fd50b-0899-435a-906c-383385a266a9 root hd0,gpt7
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
===================== sda2/efi/fedora/grub.cfg (filtered) ======================
Debian GNU/Linux 10 (buster) (on sda10) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux (on sda10) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 (on sda10) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 (on sda10) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 (on sda10) 7b307716-be2d-48ef-af16-2d149f54b14d
Windows Boot Manager (on sda2) osprober-efi-5C46-7558
Manjaro Linux (20.2) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.11-3-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.11-3-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.11-3-MANJARO x64 - recovery mode) (on sda5) osprober-gnulinux-/boot/vmlinuz-5.9-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.8.18-1-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.8.18-1-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.8.18-1-MANJARO x64 - recovery mode) (on sda5) osprober-gnulinux-/boot/vmlinuz-5.8-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.7.19-2-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.7.19-2-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.7.19-2-MANJARO x64 - recovery mode) (on sda5) osprober-gnulinux-/boot/vmlinuz-5.7-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu 20.04.1 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Debian GNU/Linux bullseye/sid (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.9.0-5-amd64 (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.9.0-4-amd64 (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.9.0-2-amd64 (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
### END /etc/grub.d/30_os-prober ###
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
===================== sda2/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid 39d77b20-31f5-4014-8d1a-519d8b70eaff root hd0,gpt6
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sda5/boot/grub/grub.cfg (filtered) ======================
Manjaro Linux acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.10.26-1-MANJARO x64) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.10.26-1-MANJARO x64 - fallback initramfs) gnulinux-5.10.26-1-MANJARO x64-fallback-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.9.16-1-MANJARO x64) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.9.16-1-MANJARO x64 - fallback initramfs) gnulinux-5.9.16-1-MANJARO x64-fallback-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.4.108-1-MANJARO x64) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel: 5.4.108-1-MANJARO x64 - fallback initramfs) gnulinux-5.4.108-1-MANJARO x64-fallback-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Windows Boot Manager (on sda2) osprober-efi-5C46-7558
Ubuntu 20.04.2 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-71-generic (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-70-generic (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Debian GNU/Linux bullseye/sid (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-5-amd64 (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-4-amd64 (on sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux 10 (buster) (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-14-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Manjaro Linux (21.0.1) (on sda9) 2693f90c-2af7-4de4-b56f-7c8e1a38ce5f
Manjaro Linux (on sda9) 2693f90c-2af7-4de4-b56f-7c8e1a38ce5f
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (on sda9) 2693f90c-2af7-4de4-b56f-7c8e1a38ce5f
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (on sda9) 2693f90c-2af7-4de4-b56f-7c8e1a38ce5f
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda5/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 / ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
======================= sda5/etc/default/grub (filtered) =======================
GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_TIMEOUT_STYLE=hidden
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet udev.log_priority=3"
GRUB_CMDLINE_LINUX=""
GRUB_SAVEDEFAULT=true
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_TERMINAL_INPUT=console
GRUB_GFXMODE=auto
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=true
GRUB_DISABLE_OS_PROBER=false
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"
==================== sda5: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
634,630935669 = 681,429778432 boot/grub/grub.cfg 1
622,775325775 = 668,699914240 boot/vmlinuz-5.10-x86_64 1
631,156459808 = 677,699088384 boot/vmlinuz-5.4-x86_64 1
623,304306030 = 669,267902464 boot/vmlinuz-5.9-x86_64 1
635,162410736 = 682,000445440 boot/initramfs-5.10-x86_64-fallback.img 1
635,079410553 = 681,911324672 boot/initramfs-5.10-x86_64.img 1
598,122711182 = 642,229370880 boot/initramfs-5.4-x86_64-fallback.img 2
634,938892365 = 681,760444416 boot/initramfs-5.4-x86_64.img 1
598,419708252 = 642,548269056 boot/initramfs-5.9-x86_64-fallback.img 2
598,063667297 = 642,165972992 boot/initramfs-5.9-x86_64.img 1
===================== sda5: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12776 mars 13 16:23 10_linux
-rwxr-xr-x 1 root root 13327 mars 13 16:23 20_linux_xen
-rwxr-xr-x 1 root root 12526 mars 13 16:23 30_os-prober
-rwxr-xr-x 1 root root 1372 mars 13 16:23 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 13 16:23 40_custom
-rwxr-xr-x 1 root root 215 mars 13 16:23 41_custom
-rwxr-xr-x 1 root root 1219 mai 16 2020 60_memtest86+
====================== sda6/boot/grub/grub.cfg (filtered) ======================
Ubuntu 39d77b20-31f5-4014-8d1a-519d8b70eaff
Ubuntu, avec Linux 5.8.0-50-generic 39d77b20-31f5-4014-8d1a-519d8b70eaff
Ubuntu, avec Linux 5.8.0-43-generic 39d77b20-31f5-4014-8d1a-519d8b70eaff
Windows Boot Manager (sur sda2) osprober-efi-5C46-7558
Manjaro Linux (21.0.1) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Debian GNU/Linux 11 (bullseye) (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-6-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-5-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-4-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux 10 (buster) (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-14-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Manjaro Linux (21.0.3) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.32-1-MANJARO x64) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.32-1-MANJARO x64 - fallback initramfs) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (21.0.1) (sur sda5) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (sur sda5) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (sur sda5) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (sur sda5) (sur sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda6/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
# /home was on /dev/sda11 during installation
/swapfile none swap sw 0 0
/dev/disk/by-uuid/3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ /mnt/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ auto nosuid,nodev,nofail,x-gvfs-show 0 0
======================= sda6/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda6: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
697,257247925 = 748,674269184 boot/grub/grub.cfg 6
668,057941437 = 717,321752576 boot/vmlinuz 1
665,151626587 = 714,201120768 boot/vmlinuz-5.8.0-43-generic 1
668,057941437 = 717,321752576 boot/vmlinuz-5.8.0-50-generic 1
665,151626587 = 714,201120768 boot/vmlinuz.old 1
669,527778625 = 718,899978240 boot/initrd.img 3
669,447990417 = 718,814306304 boot/initrd.img-5.8.0-43-generic 2
669,527778625 = 718,899978240 boot/initrd.img-5.8.0-50-generic 3
669,447990417 = 718,814306304 boot/initrd.img.old 2
===================== sda6: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17622 janv. 13 14:12 10_linux
-rwxr-xr-x 1 root root 42359 janv. 13 14:12 10_linux_zfs
-rwxr-xr-x 1 root root 12894 janv. 13 14:12 20_linux_xen
-rwxr-xr-x 1 root root 12059 janv. 13 14:12 30_os-prober
-rwxr-xr-x 1 root root 1424 janv. 13 14:12 30_uefi-firmware
-rwxr-xr-x 1 root root 214 janv. 13 14:12 40_custom
-rwxr-xr-x 1 root root 216 janv. 13 14:12 41_custom
====================== sda7/boot/grub/grub.cfg (filtered) ======================
Debian GNU/Linux 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-6-amd64 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-5-amd64 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-4-amd64 3d3fd50b-0899-435a-906c-383385a266a9
Windows Boot Manager (on sda2) osprober-efi-5C46-7558
Manjaro Linux (21.0.1) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64 - fallback initramfs) (on sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Ubuntu 20.04.2 LTS (20.04) (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-72-generic (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-71-generic (on sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Debian GNU/Linux 10 (buster) (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-14-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 (on sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Manjaro Linux (21.0.2) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.30-1-MANJARO x64) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.30-1-MANJARO x64 - fallback initramfs) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (21.0.1) (sur sda5) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (sur sda5) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (sur sda5) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (sur sda5) (on sda9) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
### END /etc/grub.d/30_os-prober ###
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda7/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=3d3fd50b-0899-435a-906c-383385a266a9 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
======================= sda7/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
==================== sda7: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
565,520500183 = 607,223013376 boot/grub/grub.cfg 6
506,954582214 = 544,338337792 boot/vmlinuz-5.10.0-4-amd64 1
516,532722473 = 554,622787584 boot/vmlinuz-5.10.0-5-amd64 1
498,989753723 = 535,786168320 boot/vmlinuz-5.10.0-6-amd64 1
498,989753723 = 535,786168320 vmlinuz 1
516,532722473 = 554,622787584 vmlinuz.old 1
511,518379211 = 549,238677504 boot/initrd.img-5.10.0-4-amd64 1
517,002758026 = 555,127484416 boot/initrd.img-5.10.0-5-amd64 1
506,494945526 = 543,844806656 boot/initrd.img-5.10.0-6-amd64 1
506,494945526 = 543,844806656 initrd.img 1
517,002758026 = 555,127484416 initrd.img.old 1
===================== sda7: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 13664 juin 7 2020 10_linux
-rwxr-xr-x 1 root root 13726 juin 7 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 juin 7 2020 30_os-prober
-rwxr-xr-x 1 root root 1416 mars 2 18:00 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 7 2020 40_custom
-rwxr-xr-x 1 root root 216 juin 7 2020 41_custom
====================== sda8/boot/grub/grub.cfg (filtered) ======================
Debian GNU/Linux 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-14-amd64 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 7b307716-be2d-48ef-af16-2d149f54b14d
Windows Boot Manager (sur sda2) osprober-efi-5C46-7558
Manjaro Linux (21.0) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.23-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.23-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.23-1-MANJARO x64 - recovery mode) (sur sda5) osprober-gnulinux-/boot/vmlinuz-5.10-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64 - recovery mode) (sur sda5) osprober-gnulinux-/boot/vmlinuz-5.9-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.105-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.105-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.105-1-MANJARO x64 - recovery mode) (sur sda5) osprober-gnulinux-/boot/vmlinuz-5.4-x86_64-root=UUID=acbf1fd6-d87d-4603-9b5d-fed2491b55f8 rw single-acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Ubuntu 20.04.2 LTS (20.04) (sur sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu (sur sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-70-generic (sur sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-66-generic (sur sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Ubuntu, avec Linux 5.4.0-65-generic (sur sda6) 6e4a5a06-446f-4577-a099-2e15b1298c4a
Debian GNU/Linux bullseye/sid (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-5-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-4-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
### END /etc/grub.d/30_os-prober ###
System setup uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda8/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda10 during installation
UUID=7b307716-be2d-48ef-af16-2d149f54b14d / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/disk/by-uuid/3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
======================= sda8/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
==================== sda8: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
440,194202423 = 472,654925824 boot/grub/grub.cfg 5
396,333034515 = 425,559355392 boot/vmlinuz-4.19.0-11-amd64 1
396,856475830 = 426,121396224 boot/vmlinuz-4.19.0-12-amd64 1
415,313510895 = 445,939486720 boot/vmlinuz-4.19.0-13-amd64 1
403,961944580 = 433,750835200 boot/vmlinuz-4.19.0-14-amd64 1
398,727577209 = 428,130476032 boot/vmlinuz-4.19.0-16-amd64 2
398,727577209 = 428,130476032 vmlinuz 2
403,961944580 = 433,750835200 vmlinuz.old 1
396,642803192 = 425,891966976 boot/initrd.img-4.19.0-11-amd64 2
403,639110565 = 433,404194816 boot/initrd.img-4.19.0-12-amd64 2
404,547626495 = 434,379706368 boot/initrd.img-4.19.0-13-amd64 3
409,264194489 = 439,444082688 boot/initrd.img-4.19.0-14-amd64 2
408,936088562 = 439,091781632 boot/initrd.img-4.19.0-16-amd64 2
408,936088562 = 439,091781632 initrd.img 2
409,264194489 = 439,444082688 initrd.img.old 2
===================== sda8: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12444 juil. 30 2020 10_linux
-rwxr-xr-x 1 root root 11497 juil. 30 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 30 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 30 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 30 2020 40_custom
-rwxr-xr-x 1 root root 216 juil. 30 2020 41_custom
====================== sda9/boot/grub/grub.cfg (filtered) ======================
Manjaro Linux b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel: 5.10.32-1-MANJARO x64) b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Manjaro Linux (Kernel: 5.10.32-1-MANJARO x64 - fallback initramfs) gnulinux-5.10.32-1-MANJARO x64-fallback-b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d
Windows Boot Manager (sur sda2) osprober-efi-5C46-7558
Manjaro Linux (21.0.1) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.10.26-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.9.16-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Manjaro Linux (Kernel 5.4.108-1-MANJARO x64 - fallback initramfs) (sur sda5) acbf1fd6-d87d-4603-9b5d-fed2491b55f8
Ubuntu 20.04.2 LTS (20.04) (sur sda6) 39d77b20-31f5-4014-8d1a-519d8b70eaff
Ubuntu (sur sda6) 39d77b20-31f5-4014-8d1a-519d8b70eaff
Ubuntu, avec Linux 5.8.0-50-generic (sur sda6) 39d77b20-31f5-4014-8d1a-519d8b70eaff
Ubuntu, avec Linux 5.8.0-43-generic (sur sda6) 39d77b20-31f5-4014-8d1a-519d8b70eaff
Debian GNU/Linux 11 (bullseye) (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-6-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-5-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux, with Linux 5.10.0-4-amd64 (sur sda7) 3d3fd50b-0899-435a-906c-383385a266a9
Debian GNU/Linux 10 (buster) (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-14-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-13-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-12-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
Debian GNU/Linux, avec Linux 4.19.0-11-amd64 (sur sda8) 7b307716-be2d-48ef-af16-2d149f54b14d
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sda9/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=5C46-7558 /boot/efi vfat umask=0077 0 2
UUID=b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d / ext4 defaults,noatime 0 1
UUID=f060896a-3410-43ac-b5a2-aa73c9b26fc2 /home ext4 defaults,noatime 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
======================= sda9/etc/default/grub (filtered) =======================
GRUB_DEFAULT=saved
GRUB_TIMEOUT=-1
GRUB_TIMEOUT_STYLE=hidden
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet apparmor=1 security=apparmor udev.log_priority=3"
GRUB_CMDLINE_LINUX=""
GRUB_SAVEDEFAULT=true
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_TERMINAL_INPUT=console
GRUB_GFXMODE=auto
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=true
GRUB_DISABLE_OS_PROBER=false
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"
==================== sda9: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
836,301792145 = 897,972211712 boot/grub/grub.cfg 1
849,822624207 = 912,490094592 boot/vmlinuz-5.10-x86_64 1
842,815753937 = 904,966524928 boot/initramfs-5.10-x86_64-fallback.img 2
849,830024719 = 912,498040832 boot/initramfs-5.10-x86_64.img 1
===================== sda9: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12776 mars 13 16:23 10_linux
-rwxr-xr-x 1 root root 13327 mars 13 16:23 20_linux_xen
-rwxr-xr-x 1 root root 12526 mars 13 16:23 30_os-prober
-rwxr-xr-x 1 root root 1372 mars 13 16:23 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 13 16:23 40_custom
-rwxr-xr-x 1 root root 215 mars 13 16:23 41_custom
-rwxr-xr-x 1 root root 1219 mai 16 2020 60_memtest86+
====================== sdc1/boot/grub/grub.cfg (filtered) ======================
Ubuntu
Ubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
========================= sdc1/syslinux.cfg (filtered) =========================
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
==================== sdc1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================== sdc1: Location of files loaded by Syslinux ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
======================== Unknown MBRs/Boot Sectors/etc =========================
Unknown MBR on /dev/sdc
00000000 41 4b 45 4f fc 31 c0 fa 8e d0 bc 00 7c fb 8e d8 |AKEO.1......|...|
00000010 bb 13 04 8b 07 83 e8 04 89 07 c1 e0 06 8e c0 b7 |................|
00000020 07 b8 7f 00 cd 10 31 db 31 c9 ba 4f 18 b8 00 06 |......1.1..O....|
00000030 cd 10 31 d2 b4 02 cd 10 b4 41 bb aa 55 cd 13 72 |..1......A..U..r|
00000040 27 81 fb 55 aa 75 21 f7 c1 01 00 74 1b 66 31 c0 |'..U.u!....t.f1.|
00000050 66 50 6a 22 06 66 50 6a 08 6a 10 89 e6 b4 42 cd |fPj".fPj.j....B.|
00000060 13 9f 83 c4 10 9e eb 0d b8 08 02 b9 23 00 ba 80 |............#...|
00000070 00 31 db cd 13 bb 07 00 72 0b 31 f6 8c c0 8e d8 |.1......r.1.....|
00000080 e8 3f 00 eb 06 be 17 7d e8 37 00 31 c0 8e d8 be |.?.....}.7.1....|
00000090 63 7d e8 2d 00 e8 1d 00 b4 01 cd 16 75 08 b4 02 |c}.-........u...|
000000a0 cd 16 24 04 74 f2 31 c0 8e d8 b8 34 12 a3 73 04 |..$.t.1....4..s.|
000000b0 ea 00 00 ff ff b4 01 cd 16 74 06 b4 00 cd 16 e2 |.........t......|
000000c0 f4 c3 ac 3c 00 74 4f 3c 0d 74 f7 3c 0a 75 10 53 |...<.tO<.t.<.u.S|
000000d0 b4 03 cd 10 fe c6 b2 00 b4 02 cd 10 5b eb e3 3c |............[..<|
000000e0 5c 75 1c b1 02 ac 3c 46 7f d8 2c 30 3c 09 7e 02 |\u....<F..,0<.~.|
000000f0 2c 07 c0 e3 04 24 0f 08 c3 fe c9 75 e8 eb c3 b9 |,....$.....u....|
00000100 01 00 b4 09 cd 10 53 31 db b4 03 cd 10 fe c2 b4 |......S1........|
00000110 02 cd 10 5b eb ac c3 0d 0a 20 20 20 20 20 20 20 |...[..... |
00000120 20 20 20 20 20 20 5c 30 34 2a 2a 2a 20 45 52 52 | \04*** ERR|
00000130 4f 52 3a 20 54 48 49 53 20 4d 45 44 49 41 20 43 |OR: THIS MEDIA C|
00000140 41 4e 4e 4f 54 20 42 4f 4f 54 20 49 4e 20 4c 45 |ANNOT BOOT IN LE|
00000150 47 41 43 59 20 4d 4f 44 45 20 2a 2a 2a 5c 30 37 |GACY MODE ***\07|
00000160 0d 0a 00 0d 0a 0d 0a 20 20 20 20 20 20 20 20 20 |....... |
00000170 20 20 20 20 5c 37 30 50 6c 65 61 73 65 20 72 65 | \70Please re|
00000180 6d 6f 76 65 20 74 68 69 73 20 6d 65 64 69 61 20 |move this media |
00000190 61 6e 64 20 70 72 65 73 73 20 61 6e 79 20 6b 65 |and press any ke|
000001a0 79 20 74 6f 20 72 65 62 6f 6f 74 5c 30 37 00 00 |y to reboot\07..|
000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001c0 02 00 ee fe ff e9 01 00 00 00 ff ff ff ff 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages ================================
File descriptor 63 (pipe:[99228]) leaked on lvs invocation. Parent PID 11019: /bin/bash
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of
sda5,
using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Manjaro Linux (21.0.1) entry (sda2/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)Dernière modification par Caille (Le 03/05/2021, à 14:56)
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#2 Le 03/05/2021, à 14:30
- abelthorne

Re : Comment retrouver mon fstab d'origine [Résolu]
Vérifie avec par exemple sudo fdisk -l que les partitions correspondent bien à /dev/sda6 et /dev/sda11 (en te basant sur leur taille et leur système de fichiers).
Ensuite, tu peux récupérer l'UUID de tes partitions avec :
ls -l /dev/disk/by-uuidet les redéclarer dans le fstab.
Pour la racine, la ligne devrait ressembler à ça (avec l'UUID de /dev/sda6) :
UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx / ext4 errors=remount-ro 0 1Pour /home (avec l'UUID de /dev/sda11), je suppose que les options devraient être similaires, avec peut-être defaults à la place de errors=remount-ro et 2 à la place de 1 pour le dernier caractère.
Hors ligne
#3 Le 03/05/2021, à 14:38
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Bonjour,
Merci de venir à mon secours. ![]()
Il faut effectivement que je retrouve l'UUID de chaque partition !
Pour les partitions j'ai vérifié avec gparted, c'est bien sda11 1b1f9f3d-b55c-416b-ab54-9fc73724eea5 pour le /home et sda6 39d77b20-31f5-4014-8d1a-519d8b70eaff pour la /racine
ubuntu@ubuntu:~$ sudo fdisk -l
Disque /dev/loop0 : 1,99 GiB, 2109763584 octets, 4120632 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop1 : 55,48 MiB, 58159104 octets, 113592 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop2 : 218,102 MiB, 229629952 octets, 448496 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop3 : 64,79 MiB, 67915776 octets, 132648 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop4 : 51,4 MiB, 53522432 octets, 104536 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop5 : 31,9 MiB, 32595968 octets, 63664 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/sda : 953,89 GiB, 1024209543168 octets, 2000409264 secteurs
Disk model: Samsung SSD 860
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 30C45098-9564-4BB9-A5F5-9970C49D230A
Périphérique Début Fin Secteurs Taille Type
/dev/sda1 2048 1085439 1083392 529M Environnement de récupératio
/dev/sda2 1085440 1290239 204800 100M Système EFI
/dev/sda3 1290240 1323007 32768 16M Réservé Microsoft
/dev/sda4 1323008 410923007 409600000 195,3G Données de base Microsoft
/dev/sda5 1221120000 1384959999 163840000 78,1G Système de fichiers Linux
/dev/sda6 1384960000 1487874047 102914048 49,1G Système de fichiers Linux
/dev/sda7 1025808384 1221119999 195311616 93,1G Système de fichiers Linux
/dev/sda8 830496768 1025808383 195311616 93,1G Système de fichiers Linux
/dev/sda9 1714812928 1817212927 102400000 48,8G Système de fichiers Linux
/dev/sda10 1817212928 2000409230 183196303 87,4G Système de fichiers Linux
/dev/sda11 1487874048 1714812927 226938880 108,2G Système de fichiers Linux
Les entrées de la table de partitions ne sont pas dans l'ordre du disque.
Disque /dev/sdb : 1,84 TiB, 2000398934016 octets, 3907029168 secteurs
Disk model: ST2000LX001-1RG1
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 3E07897E-1777-4E1A-9427-57CF40C8F565
Périphérique Début Fin Secteurs Taille Type
/dev/sdb1 34 32767 32734 16M Réservé Microsoft
/dev/sdb2 32768 3798503423 3798470656 1,8T Données de base Microsoft
/dev/sdb3 3798503424 3907028991 108525568 51,8G Système de fichiers Linux
La partition 1 ne commence pas sur une frontière de cylindre physique.
Disque /dev/sdc : 7,69 GiB, 8242855936 octets, 16099328 secteurs
Disk model: Flash Disk
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 568AB238-7B74-4880-AEB5-CFCE921E2DDB
Périphérique Début Fin Secteurs Taille Type
/dev/sdc1 2048 16099294 16097247 7,7G Données de base Microsoft
ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ls -l /dev/disk/by-uuid
total 0
lrwxrwxrwx 1 root root 11 mai 3 13:27 1b1f9f3d-b55c-416b-ab54-9fc73724eea5 -> ../../sda11
lrwxrwxrwx 1 root root 10 mai 3 13:27 1E2A742A2A73FCD9 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 3 13:27 2A1A45ED1A45B71B -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 3 13:27 39d77b20-31f5-4014-8d1a-519d8b70eaff -> ../../sda6
lrwxrwxrwx 1 root root 10 mai 3 13:27 3d3fd50b-0899-435a-906c-383385a266a9 -> ../../sda7
lrwxrwxrwx 1 root root 10 mai 3 13:27 3E64D2DA64D2944D -> ../../sdb2
lrwxrwxrwx 1 root root 10 mai 3 13:27 5C46-7558 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 3 13:27 7158c1a9-90c8-4a41-a645-a72ad84a1275 -> ../../sdb3
lrwxrwxrwx 1 root root 10 mai 3 13:27 7b307716-be2d-48ef-af16-2d149f54b14d -> ../../sda8
lrwxrwxrwx 1 root root 10 mai 3 13:27 acbf1fd6-d87d-4603-9b5d-fed2491b55f8 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 3 13:27 b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d -> ../../sda9
lrwxrwxrwx 1 root root 10 mai 3 13:27 B2A6-1950 -> ../../sdc1
lrwxrwxrwx 1 root root 11 mai 3 13:27 f060896a-3410-43ac-b5a2-aa73c9b26fc2 -> ../../sda10
ubuntu@ubuntu:~$ Dernière modification par Caille (Le 03/05/2021, à 15:02)
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#4 Le 03/05/2021, à 14:55
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Merci, c'est bon il a redémarré normalement. ![]()
Mon nouveau fstab (je me suis servit de celui de manjaro que j'ai copier au dessous et # commenté). ![]()
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
UUID=39d77b20-31f5-4014-8d1a-519d8b70eaff / ext4 defaults,noatime 0 1
UUID=1b1f9f3d-b55c-416b-ab54-9fc73724eea5 /home ext4 defaults,noatime 0 2
# /home was on /dev/sda11 during installation
/swapfile none swap sw 0 0
/dev/disk/by-uuid/3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ /mnt/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ auto nosuid,nodev,nofail,x-gvfs-show 0 0
# /etc/fstab: static file system information (systeme_manjaro).
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# UUID=5C46-7558 /boot/efi vfat umask=0077 0 2
# UUID=b12399ad-9138-4a2c-8f5b-cca8f2bbfb0d / ext4 defaults,noatime 0 1
# UUID=f060896a-3410-43ac-b5a2-aa73c9b26fc2 /home ext4 defaults,noatime 0 2
# tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
# Les deux UUID de ubuntu_home (sda11) et ubuntu_systeme (sda6)
# 1b1f9f3d-b55c-416b-ab54-9fc73724eea5 -> ../../sda11
# 39d77b20-31f5-4014-8d1a-519d8b70eaff -> ../../sda6Serait-il possible de régénérer un fstab propre sans aucune erreur, car j'ai fait plutôt du bricolage, déjà je peux supprimer les lignes commentées !
Par exemple cette ligne commentée correspond à quoi : # /home was on /dev/sda11 during installation
Dernière modification par Caille (Le 03/05/2021, à 15:23)
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#5 Le 03/05/2021, à 15:55
- erresse

Re : Comment retrouver mon fstab d'origine [Résolu]
Bonjour,
Comme le disait abelthorne, l'option pour la racine, c'est "errors=remount-ro" et non "defaults,noatime" comme tu l'as indiqué.
Ça permet de remonter automatiquement le volume racine en lecture seule en cas d'erreur, je ne sais pas pourquoi manjaro fait autrement...
Par exemple cette ligne commentée correspond à quoi : # /home was on /dev/sda11 during installation
Ces lignes ne sont que des commentaires pour indiquer à quel périphérique correspond l'UUID du volume qui est monté, ça ne signifie rien pour le système, c'est juste à l'intention de l'utilisateur humain...
Dernière modification par erresse (Le 03/05/2021, à 15:59)
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#6 Le 03/05/2021, à 16:06
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Bonjour,
Je n'avais pas vu ta réponse avant cette question. ![]()
Je modifie donc l'option par errors=remount-ro. ![]()
je suppose que les options devraient être similaires, avec peut-être defaults à la place de errors=remount-ro et 2 à la place de 1 pour le dernier caractère.
Justement comment savoir si à l'origine c'est bien defaults ou errors=remount-ro et quelle en est l'importance, actuellement j'ai mis "defaults" et ça fonctionne ?
Si je me réfère à la documentation il y a un fstb en exemple, il y a seulement la racine en errors=remount-ro
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=33b870b8-a81e-4203-a4fd-7affa9f412fb / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda5 during installation
/dev/sda5 /boot ext2 defaults 0 2
# /musique was on /dev/sda8 during installation
LABEL=ma-musique /musique ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=2c442228-1991-48c7-bad9-a80dfc8267cf none swap sw 0 0Dernière modification par Caille (Le 03/05/2021, à 16:08)
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#7 Le 03/05/2021, à 16:28
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Bonjour,
Comme le disait abelthorne, l'option pour la racine, c'est "errors=remount-ro" et non "defaults,noatime" comme tu l'as indiqué.
Ça permet de remonter automatiquement le volume racine en lecture seule en cas d'erreur, je ne sais pas pourquoi manjaro fait autrement...Caille a écrit :Par exemple cette ligne commentée correspond à quoi : # /home was on /dev/sda11 during installationCes lignes ne sont que des commentaires pour indiquer à quel périphérique correspond l'UUID du volume qui est monté, ça ne signifie rien pour le système, c'est juste à l'intention de l'utilisateur humain...
Bonjour erresse,
Je viens de modifier une dernière fois mon fstab, ce doit-être bon ?
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
UUID=39d77b20-31f5-4014-8d1a-519d8b70eaff / ext4 errors=remount-ro 0 1
UUID=1b1f9f3d-b55c-416b-ab54-9fc73724eea5 /home ext4 defaults 0 2
# /home was on /dev/sda11 during installation
/swapfile none swap sw 0 0
UUID=3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0L'espace entre les chiffres "0" "0" ou "0" "1" n'est pas toujours le même, c'est probablement sans importance, il faut au moins un espace mais 10 c'est sans importance ?
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#8 Le 03/05/2021, à 16:33
- abelthorne

Re : Comment retrouver mon fstab d'origine [Résolu]
Aucune importance pour les espaces, il peut y en avoir plusieurs, tu peux mettre des tabulations...
Hors ligne
#9 Le 03/05/2021, à 16:33
- erresse

Re : Comment retrouver mon fstab d'origine [Résolu]
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# /boot/efi was on /dev/sda2 during installation
UUID=5C46-7558 /boot/efi vfat umask=0077 0 1
# / was on /dev/sda6 during installation
UUID=39d77b20-31f5-4014-8d1a-519d8b70eaff / ext4 errors=remount-ro 0 1
# /home was on /dev/sda11 during installation
UUID=1b1f9f3d-b55c-416b-ab54-9fc73724eea5 /home ext4 defaults,noatime 0 2
/swapfile none swap sw 0 0
/dev/disk/by-uuid/3E64D2DA64D2944D /mnt/3E64D2DA64D2944D ntfs nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ /mnt/ata-TSSTcorp_DVDWBD_SN-406AB_R8YE6GTD2000MQ auto nosuid,nodev,nofail,x-gvfs-show 0 0To fstab devrait ressembler à ça, il faut que les commentaires soient immédiatement avant les montages concernés pour comprendre à quel UUID se rapporte le nom de périphérique.
Et oui,en effet, c'est seulement la racine qui à cette option "errors=remount-ro", les autres volumes sont simplement en "défaults".
De même, pour la vérification des volumes au démarrage, la partition EFI et la racine ont un "1", les autres volumes ont "2" pour les formats Linux, et "0" pour les volumes en NTFS et le swap.
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#10 Le 03/05/2021, à 16:36
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Aucune importance pour les espaces, il peut y en avoir plusieurs, tu peux mettre des tabulations...
Même pas d'espace c'est bon ?
Ça indique quoi les chiffres 0, 1, 2 dans le fstab ?
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#11 Le 03/05/2021, à 16:47
- abelthorne

Re : Comment retrouver mon fstab d'origine [Résolu]
Même pas d'espace c'est bon ?
Il faut au moins une espace entre les options, sinon mount va considérer que c'est une seule grosse option. Si tu écris ça :
UUID=39d77b20-31f5-4014-8d1a-519d8b70eaff/ext4errors=remount-ro01Il va chercher un UUID qui s'appelle "39d77b20-31f5-4014-8d1a-519d8b70eaff/ext4errors=remount-ro01" et ne va pas trouver les paramètres derrière...
Ça indique quoi les chiffres 0, 1, 2 dans le fstab ?
La dernière colonne, c'est l'ordre dans lequel fsck va vérifier les partitions s'il y a une vérification automatique du système de fichiers programmée. Il va vérifier la partition racine (1), puis celle pour /home (2), il pourrait y en avoir une à 3 derrière, etc.
Un 0 indique qu'on ne fait pas de vérification de la partition. Les numéros sont indépendants d'un disque à l'autre : si tu as deux disques avec chacun deux partitions et que tu veux qu'elles soient vérifiées automatiquement, tu mettrais comme ordre 1, 2 (premier disque) et 1, 2 (deuxième disque), pas 1, 2, 3, 4.
L'avant-dernière colonne, je ne sais pas. Le man mentionne qu'elle est utilisée par la commande dump, qui sert à afficher des infos, mais je ne sais pas dans quelles conditions elle est utilisée.
Hors ligne
#12 Le 03/05/2021, à 16:52
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Merci,
Je viens de lire la doc à ce sujet.
Il y a aussi une information indiquée au sujet des SSD, c'est l'option discard active le TRIM sur les partitions SSD (à rajouter manuellement) ?
Je n'ai rien rajouter, la prise en charge de TRIM est bonne, voir ci-dessous.
caille@caille-N76VB:~$ sudo hdparm -I /dev/sda | grep TRIM
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIMUUID=1b1f9f3d-b55c-416b-ab54-9fc73724eea5 /home ext4 defaults,noatime 0 2Ton fstab devrait ressembler à ça "errors=remount-ro", les autres volumes sont simplement en "défaults".
@erresse : J'ai simplement laissé default 0 2, il faut plutôt defaults,noatime 0 2 ?
C'est indiqué noatime pour les SSD : atime/noatime Inscrit (ou non) la date d'accès (préférez noatime pour les SSD)
Dernière modification par Caille (Le 03/05/2021, à 17:02)
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#13 Le 03/05/2021, à 17:02
- abelthorne

Re : Comment retrouver mon fstab d'origine [Résolu]
Il me semble que le TRIM est automatiquement activé pour les SSD sur Ubuntu depuis pas mal de temps, sans avoir besoin de le préciser dans les options. Par contre, si tu voulais le désactiver, je suppose qu'il y a une option qui permet de le faire.
Je ne suis pas sûr de ce que fait l'option noatime : apparemment, elle désactive le timestamp (la date) du dernier accès sur les fichiers ? Je ne suis pas sûr que ce soit une très bonne idée de le faire, c'est quand même une information qui peut être potentiellement utile.
Hors ligne
#14 Le 03/05/2021, à 17:09
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Il me semble que le TRIM est automatiquement activé pour les SSD sur Ubuntu depuis pas mal de temps, sans avoir besoin de le préciser dans les options. Par contre, si tu voulais le désactiver, je suppose qu'il y a une option qui permet de le faire.
Je ne suis pas sûr de ce que fait l'option noatime : apparemment, elle désactive le timestamp (la date) du dernier accès sur les fichiers ? Je ne suis pas sûr que ce soit une très bonne idée de le faire, c'est quand même une information qui peut être potentiellement utile.
En fait il y a deux possibilités atime et noatime Inscrit (ou non) la date d'accès (préférez noatime pour les SSD)
Ils disent simplement de préférer noatime à atime si j'ai bien compris la documentation, il n'indique de placer cette option ?
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne
#15 Le 03/05/2021, à 17:19
- abelthorne

Re : Comment retrouver mon fstab d'origine [Résolu]
Je ne sais pas ce qui est utilisé quand on ne précise rien (ce qui est inclus dans defaults, quoi). Il y a par exemple cet article qui mentionne que certaines applis utilisent le timestamp atime, et peuvent donc ne plus fonctionner avec noatime. Mais ce sont généralement de vieilles applis qui ne sont plus utilisées de nos jours. Après, est-ce qu'il y a des cas particuliers du même style qui le sont encore...
Personnellement, sans savoir exactement ce que fait une option et ce qu'elle implique, je laisse les valeurs par défaut.
Hors ligne
#16 Le 03/05/2021, à 17:33
- erresse

Re : Comment retrouver mon fstab d'origine [Résolu]
Ces recommandations concernant les SSD datent sans doute pas mal, du temps où ces périphériques étaient réputés fragiles et s'usant bien plus vite que les HDD. C'est du même ordre que "ne pas mettre le swap sur un SSD" ou "mettre ses fichiers personnels sur HDD pour éviter l'usure prématurée de SSD", etc.
En fait, il fallait équiper sa machine de SSD beaucoup plus rapide que le HDD, mais surtout ne pas l'utiliser pour l'économiser !
Une ânerie monumentale, quoi !!!
Depuis, les SSD se sont révélés fiables et très solides, ils équipent en série des portables de bonne facture qui n'ont aucun HDD en supplément pour économiser le SSD et qui fonctionnent très bien et très longtemps avec cette configuration.
Donc, pour conclure, écrire ou ne pas écrire le timestamp sur le SSD lorsqu'on consulte un fichier est probablement indifférent aujourd'hui, à mon humble avis.
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#17 Le 03/05/2021, à 21:09
- Caille

Re : Comment retrouver mon fstab d'origine [Résolu]
Pour ce qui est du SSD j'évite dans la mesure du possible de l'user inutilement. J'ai quand même réussi à flinguer trois cartes microSD Sandisk de 128 Go plutôt haut de gamme qui sont équipées des mêmes types de puces deux avec un Galaxy-Note 4 et une avec un Honor-Play en 5 ans, c'est donc loin d'être inusable ou alors les puces des cartes mémoires sont beaucoup plus fragiles que celles des SSD ?
PC Portable: Asus N76VB-T5041H (Core I-7 3630QM - Ram 16 Go, Vidéo INTEL HD 4000 + GEFORCE 740 M Ram 4 Go)
Systèmes installés: Windows 10-21H1 / Manjaro (KDE) / Ubuntu - 20.04.3 LTS (Gnome) / EOS (XFCE) / ArcoLinux / ArchLinux (XFCE)
Systèmes: SSD Samsung 860 PRO - 1 To / Données: HDD - Seagate FireCuda 2 To hybride SSHD / Imprimante: Brother MFC-L2720DW
Hors ligne