Ubuntu-fr

j'essaye de faire fonctioner mon scaner mais rien ni fait:|

xsane ne detecte pas mon materiel:
pourtant quand je fais lsusb tout semble détecté.
alors je continu avec     sane-find-scanner

je suis maintenant bloqué pour continuer.... je suis preneur pour 1 coup de main

seb@seb-ubuntu:~$ lsusb
Bus 005 Device 002: ID 04a9:170c Canon, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 1532:0002
Bus 003 Device 001: ID 0000:0000
seb@seb-ubuntu:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04a9, product=0x170c) at libusb:005:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

merci

seb